Trust the Next Chapter Afro Mug Tumbler Glass UV DTF Stickers
Trust the Next Chapter Afro Mug Tumbler Glass UV DTF Stickers
- Size: 4"
How to Apply
- Cut out the sticker if needed: Once you have your single sticker best practices is to cut edges as close to the image as possible to prepare for placement on you product.
- Stick: Can be placed onto hard surfaces such as: Glass, Metal, Porcelain, Plastic or any hard surface that is clean. Remember that the adhesive on the sticker is very powerful so once placed it CANNOT be removed.
- Peel Film from back: Done Transferring! The print will be transferred to the surface.
How To Apply
How To Apply
DTF Transfers
Pre-Press garment for 5 seconds
1st Press: 300 degrees for 10 seconds medium pressure
Peel Cool (rubbing the film with cloth is recommended)
2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.
Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area
Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.
UV DTF Stickers
Shipping & Returns
Shipping & Returns
DTF Transfers are non-refundable due to user error. We will however replace defective transfers before they have been applied. We will request photos of such defects to approve these claims. These are a no refunds/final sale item with the exception of defects before application.
Transfer Sizes
Transfer Sizes
◙11x16 - Fits most TShirts Medium-3XL
◙11x12 - Recommended for Hoodies (Includes 2-3 smaller images)
◙8x10 - Fits Youth to Small Adult TShirts (2 per sheet)
◙22x16 - Recommended for TShirts 3XL-6XL
Note: In many instances the tshirt and hoodie is the same size
Care Instructions
Care Instructions
How to wash a DTF Printed shirt? Turn your T-shirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.