New Edition

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size

DTF Transfers can be applied to on any color and any material including: Cotton, poly, denim, silk & more.

Pre-Press garment for 5 seconds

1st Press: 300 degrees for 10 seconds medium pressure

Peel Cool (rubbing the film with cloth is recommended)

2nd Press: Cover with teflon or parchment paper, 300 degrees for 10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 250-285 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate.

How to wash a DTF Printed shirt? Turn your tshirt inside out. Fill your washing machine with cold water. Use the correct amount of soap and DO NOT use Bleach. Use the gentle cycle on your washing machine. Air Dry your t-shirt or use the LOW heat setting on your dryer.

Storage: You may store your transfers in a breathable open poly bag in a cool dry place however, we cannot be held liable for DTF transfers stored by our customers. All transfers purchased from the website is being sold for the sole purpose of being applied to a garment upon receipt or shortly after. Storing the transfers are at the sole discretion of the customers.

➥11x16 - Fits most Adult TShirts Medium-2XL

➥11x12 - Recommended for Hoodies (Includes 2-3 smaller images)

➥8x10/11 - Fits Kids to Small Adult TShirts (1-2 per sheet depending on image)

➥22x16 - Recommended for TShirts 3XL-6XL or you can gang with any sizes

➥4x4 Gang - 11x16 Gang sheet of 6-8 small images

Note: In many instances the tshirt and hoodie is the same size